产品中心
- 泽任订制
- FST动物实验器械
- 瑞士ideal-tek镊子
- 瑞士Dumont镊子
- Weller
- Techni-Tool
- 瑞士Rubis镊子
- arosurgica
- Genesee Scientific
- Gilder Grids
-
Entegris
- WEICON
- ACCURIS
- AIMS
- RMC钻石刀
- Sipel镊子
- 德国WIHA
-
Si-Mat
- Jokari
- Circuitmedic
-
Glissando病理切片扫描仪
- KNIPEX(凯尼派克)
- Swann-morton
- Cellpoint Scientific
- Swanstrom
- All-spec
- 新华器械
- Excelta
- MENDA
- MEISEI
- Erem
- Regine
-
OPTRASCAN病理扫描仪
- Benchmark
-
IDEAL
- 大龙仪器
- 五洋医疗
- Hozan(宝山)
- 3M
- Stoelting
- Roboz
-
Diatome钻石刀
- Fine Science Tools
- PLATO
- NanoSoft
-
Avantama
-
PSI打击器及配件
- Aptum
- xuron
- SPI
-
抗原检测
- ASI Instruments
-
上海一恒
-
上海雷磁
- Quantifoil
- 上海方需
- 苏州六六
-
Hamilton
- ISMART
-
显微镜
-
Bonllmann
- AVEN
- 塔望科技
-
瑞典Haglof激光测距仪
- STILLE
-
美国安维迪
- 德国贝朗蛇牌
- Medline
-
蛋白纯化系统
-
OHAUS奥豪斯
- 康博特森
- Ossila
- 赛宁(苏州)生物
- Bernstein
- 洁盟清洗机
- Ted Pella
- DSI
- Keller
-
Smart Tweezers
- 瑞士PB
-
Microscopes Internat...
- Lattice Gear
-
凯氏定氮仪
- lindstrom
- 美国EMS
-
1-material
-
仪器
- realisticflies
- Boive
- Zivic
新闻详情
ted pella塑料头材质
日期:2024-05-21 22:40
浏览次数:185
摘要:
SV - PVDF (polyvinylidene fluoride) reinforced with carbon fiber.
Excellent mechanical strength and toughness
Smooth surface
Heat stabilized, high heat capability, continuous use temperature up to 150°C (302°F)
High purity (clean room and medical devices approved, low extraction value)
Excellent chemical resistance to most aggressive substances and solvents. Resistant to halogens. Not compatible with NMP.
..
SV - PVDF (polyvinylidene fluoride) reinforced with carbon fiber.
- Excellent mechanical strength and toughness
- Smooth surface
- Heat stabilized, high heat capability, continuous use temperature up to 150°C (302°F)
- High purity (clean room and medical devices approved, low extraction value)
- Excellent chemical resistance to most aggressive substances and solvents. Resistant to halogens. Not compatible with NMP.
- Outstanding resistance to hydrofluoric acid (40% conc., 90°C, 194°F), nitric acid (50% conc., 90°C, 194°F), hydrochloric acid (36% conc., 90°C, 194°F)
- High abrasion resistance
- Resistant to UV and nuclear radiation (sterilization)
- ESD safe material
- Typical applications include handling of very scratch and contamination-sensitive components, cleaning and etching processes
CF - Carbofib (Polyamide 66) reinforced with carbon fiber.
- Heat stabilized
- Very high rigidity, excellent tensile and flexural strength, fatigue and creep resistance
- Low friction, self-lubricating properties, excellent wear and abrasion resistance
- Good heat capability
- Good chemical resistance (oils, grease, fuels, non-polar solvents); not resistant to strong acids, alkalis and hot water or steam
- ESD safe material
- Very low coefficient of linear thermal expansion
- Typical applications include handling of sensitive components and devices (electronic components, micro-mechanical parts, glass and ceramic substrates, capillary, etc.)
CP - PEEK (polyether ether ketone) reinforced with carbon fiber
- Very hard, rigid, high tensile and flexural strength, very high wear resistance
- High heat capability (260-300°C, 500-572°F), good dimension stability, low thermal linear expansion coefficient
- Excellent resistance to chemicals and aggressive agents, excellent resistance to thermal ageing. Compatible with NMP.
- ESD-safe material
- Typical applications include handling of components in cleaning/chemical/assembly processes also at high temperature (soldering)