If you’re in the mood for trying out an easy DIY project, you’ll find here five simple steps to help you make a scribing tool. You can make your tool for basic home tasks. If you need to accomplish more serious tasks, get a scribing tool from Lattice Gear or get us to make one just for you.
This piece starts by showing you how to make a scribing tool at home. Next, it looks at what you can do with the scribing tool after making it. It then wraps up with some benefits of a wafer cleaving tool.
How To Make A Scribing Tool At Home
To make a simple scribing tool at home, follow these steps;
-
Get a mechanical pencil and take out the refill lead.
-
After that, remove the back cap.
-
Then get a needle. If it has a plastic protective cover at the back, cut off that part.
-
Drop the needle in from the open back of the pencil.
-
Pop the back cap back in place and click on it. Your basic scribing tool is all set.
What Can You Use A Scribing Tool For?
-
A scribing tool helps you hand scribe a wafer.
-
It enables you to make fine marks and scribes on the wafer surface.
-
A Scribing tool makes it easier to achieve an accurate cleave.
-
It creates weak points in the sample.
What Are The Benefits Of A Wafer Cleaving Tool?
-
A wafer cleaving tool, like a plier, provides symmetrical force when breaking the substrate.
-
It lets you achieve clean and safe breaks of a variety of materials.
-
With a wafer cleaving tool, you can split samples into tiny chips.