· Designed to fit and maximize capacity in most CO2 incubators
· Remote control, adjust without disrupting the CO2 environment
· Horizontally circular 19mm orbit for aeration & mixing
· Instantly exchange flask clamps with MAGic Clamp™ accessories (PATENTED)
BT4001 Orbi-Shaker™ CO2 with remote controller and rubber mat platform (13x12")
BT4011 Orbi-Shaker™CO2 XL orbital shaker with flat mat platform (16 x 16.5")
The new Orbi-Shaker CO2 series is designed for shaking, mixing& aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%.
To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s).
The instrument is supplied with a non-slip rubber mat platform. In addition, convenient MAGic Clamp™ platforms (of multiple sizes) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method (PATENTED) has been widely recognized as the easiest way to instantly change between flask clamps of different sizes.
Speed Range
30 to 300 rpm
Speed Increment
1 rpm
Orbit
19mm
Timer
1 min. to 99 hr or continuous
Ambient Operating Temp.
+0°C to +65°C
Warranty
2 Years
BT4001 Orbi-Shaker CO2
Platform Size
13 x 12 in. / 33 x 30 cm
Load Capacity
1 x 2L or 5 x 1L
Dimensions (in)
11.9 x 13.4 x 3.5
Dimensions (cm)
30 x 34 x 9
Weight
25lbs (11.5kg)
Cord Length
60.5in / 154 cm
Electrical
115 or 230V 50-60Hz; 600W
BT4011 Orbi-Shaker CO2 XL
16 x 16.5 in. / 40 x 42.5 cm
5 x 2L or 9 x 1L
17 x 18 x 5
43 x 45.75 x 12.7
50lbs (23kg)
Cord Lenght
60.5 / 154 cm