S V4 PEDOT:PSS is a highly conductive blue dispersion formulated in glycols for screen printing. It can be processed to form a flexible or rigid substrate via various processing techniques, such as screen printing. Offering high conductivity, flexibility, and optical transparency, S V4 PEDOT:PSS is used for transparent electrodes and thermoforming electronics such as electrochromic devices and in-mold electronics. The applications vary from smart wearable textiles, pressure sensors, and electrochromic displays to electroluminescence (EL) lightings and organic thin film transistors (OTFTs).
rGO/Sb2Te3/SV4/PEDOT:PSS composite films prepared by screen printing, followed by cold pressing and annealing treatment, achieved a power factor of 14.13 μW/mK2 at 375 K when the content of rGO/Sb2Te3 is 85 wt.% with high electrical conductivity of 298.46 S/cm.
Technical Data Product Name Clevios™ S V4 Solvent Glycols (Paste) Composition PEDOT/PSS (1:2.5 w/w) CAS Number 155090-83-8 Solid Content N/A Sheet Resistance 100 – 1000 Ω/sq Conductivity High conductivity Viscosity 1.5 – 6.0 Pa.s Packaging 100 g of solution (paste) sealed in a light resistant bottle with temperature indicator Storage 3 – 5 °C Choosing a PEDOT:PSS Material S V3, S V3 STAB, and S V4 STAB are also available in our range of PEDOT:PSS. As formulated pastes for screen-printing transparent conductive electrodes, these materials offer the following advantages: Thermoforming into three dimensional shapes, in mold-electronics Highly conductive Transparent Flexible Screens can be easily cleaned by water Product Description Sheet Resistance* (Ohm/sq) Transmission* (%) S V3 Standard dispersion for screen printing 350 – 500 85 S V3 STAB S V3 with improved environmental stability 450 – 600 86 S V4 Highly conductive formulation 250 – 400 85 S V4 STAB S V4 with improved environmental stability 300 – 500 86 *Typical sheet resistance and transmission values measured on prints made with standard 140/31 screen on Melinex 506, transmission value including substrate.
S V3, S V3 STAB, and S V4 STAB are also available in our range of PEDOT:PSS. As formulated pastes for screen-printing transparent conductive electrodes, these materials offer the following advantages:
*Typical sheet resistance and transmission values measured on prints made with standard 140/31 screen on Melinex 506, transmission value including substrate.