产品中心
产品详情
查看大图

  • 产品名称：Q钉形缺口样品台16187-18

  • 产品型号：
  • 产品厂商：Ted pella
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
Round PELCO® Q Pin Stub, Ø18mm, 6mm Pin Height
详情介绍：
Direction for use of the PELCO® Q Pin Stubs
Record position(s):
  1. Locate notch; we suggest to position it in the upper right corner
  2. Set SEM stage tilt at zero
  3. Set SEM beam shift and stage rotation at zero
  4. Align the sides of the PELCO® Q Stub parallel with the X and Y movements of the stage
  5. Image the tip of the notch and determine the tip; define the tip of the notch the 0,0 location on the PELCO® Q Stub
  6. Index any location with reference to the tip of the notch and record the position(s); example 5.64mm Left and 4.28mm Down
  7. Store the indexing positions with the PELCO® Q Stub together with an image
Relocate position(s):
  1. Locate notch; we suggest to position it in the upper right corner
  2. Set stage tilt at zero
  3. Line up the sides of the PELCO® Q Stub parallel with the X- and Y-movements of the stage
  4. Image the tip of the notch and determine the tip; define the tip of the notch the 0,0 location on the PELCO® Q Stub
  5. Retrieve recorded positions for the stub and move the stage to location; example 5.64mm Left and 4.28mm Down
  6. The previously stored location should now be in the field of view


Engraved Engraved
close-up view
of 90° notch 		Round PELCO® Q Pin Stubs

In this simplified round Q Pin Stub, the 90° notch can be used as an origin reference point for the SEM stage. Ideal for low magnification correlated imaging.

Made in USA
Prod # Description Unit
16187-18 Round PELCO® Q Pin Stub, Ø18mm, 6mm Pin Height each

姓名：
电话：
您的需求：