- 泽任订制
- FST动物实验器械
- 瑞士ideal-tek镊子
- 瑞士Dumont镊子
- Techni-Tool
- 瑞士Rubis镊子
- arosurgica
- Genesee Scientific
- Gilder Grids
-
Entegris
- WEICON
- ACCURIS
- AIMS
- RMC钻石刀
- Sipel镊子
- 德国WIHA
-
Si-Mat
- Jokari
- Circuitmedic
-
Glissando病理切片扫描仪
- KNIPEX(凯尼派克)
- Swann-morton
- Cellpoint Scientific
- Swanstrom
- All-spec
- 新华器械
- Excelta
- MENDA
- MEISEI
- Erem
- Regine
-
OPTRASCAN病理扫描仪
- Benchmark
-
IDEAL
- 大龙仪器
- 五洋医疗
- Hozan(宝山)
- 3M
- Stoelting
- Roboz
-
Diatome钻石刀
- Fine Science Tools
- PLATO
-
抗原检测
- NanoSoft
-
Avantama
-
PSI打击器及配件
- Aptum
- xuron
- SPI
- ASI Instruments
-
上海一恒
-
上海雷磁
- Quantifoil
- 上海方需
- 苏州六六
-
Hamilton
- ISMART
-
显微镜
-
Bonllmann
- AVEN
- 塔望科技
-
瑞典Haglof激光测距仪
- STILLE
-
美国安维迪
- 德国贝朗蛇牌
- Medline
-
蛋白纯化系统
-
OHAUS奥豪斯
- 康博特森
- Ossila
- 赛宁(苏州)生物
- Bernstein
- 洁盟清洗机
- Ted Pella
- DSI
- Keller
-
Smart Tweezers
- 瑞士PB
-
Microscopes Internat...
- Lattice Gear
-
凯氏定氮仪
- lindstrom
- 美国EMS
-
1-material
-
仪器
- realisticflies
- Boive
- Zivic
LCR-Reader Colibri is a fully automatic or manual LCR- and ESR-meter. This device can automatically determine the type of component and instantly measure with a 0.5% basic accuracy.
The user is able to select the desired test frequency easily by pressing the one-navigational button on the device. Colibri requires no set-up between measurements. When the Colibri has a component between its tips, it will automatically determine the type of component and best test parameters to use for that component. All measurement values, including the component type, test mode used, test frequency, and any secondary values (ie: ESR) are instantly available on the OLED display.
For more specific measurements, users can select the component type/measurement mode, and the desired test signal level. The Colibri uses a Li-Ion battery with micro-USB charging. It's 1 oz. weight and small form makes it perfect for field work.
Features:
· Automatic measurement of L-C-R and ESR
· Basic Accuracy of 0.5%
· Variable test frequencies of 10 kHz, 1 kHz, and 100 Hz
· Automatic best range
· Li-Ion rechargeable battery, Optional USB Charger
· 28 gram (1 oz) weight
The Colibri Pro Task Kit device comes with:
· A set of spare ergonomic bent tweezer probes
· USB wall charger and cable
· Offset Calibration Board. The Offset Calibration Board allows for more accuracy when determining the parastics of a component. Instead of estimating the size of the component with the multimeters tips, simply place them in the corresponding holes on the dummy PCB. The device will then display a value which can be manually removed from the actual component value.
The Colibri device does NOT come with an NIST traceable calibration certificate.