4-970-A

BIT SET 47 PCS WITH TORQUE ADAPTER 0.1 + 0.2 NM

• Content: see parts list
• including all important bit sizes, one 1/4 inch to 4 mm bit adapter, one dissipative ESD handle and a 110 mm extension
• preset torque, tolerance +/-10% (+/-6% on request), accurate and accurate for 20,000 clicks
• adapter Ø 8 mm, length 22 mm (without shank). In combination with power-tool max. speed 100 rpm.
• hex shank 4.0 mm, magnet bit holder 4.0 mm
• material stainless steel and high-quality tool steel
• extension made of aluminum with 4 mm bit holder, ESD-handle (10^6 to 10^9 ohm)
• in plastic case with foam insert
• measures 175 x 160 x 45 mm
• weight 410 g

• GENERAL INFORMATION

  Turn your bits and a holder into a perfect torque tool. Convenient to combine with pre-set torque for tightening or loosening. These high-precision fine tools are available from 0.1 to 0.7 Nm and are used in combination with 4 mm bits. They are often used as a complete solution for work on electronic equipment, in quick-change systems, robotic stations, aerospace, medical or just about any workbench where precise torque is needed. The click sound indicates when torque is reached, so the adapter cannot be overtorqued. No torque is released when loosening screws (due to the locked core shaft), so no additional loosening tool is required.

  ---

  CONTENT

  Bit set with torque adapter consists of:

  • 4-971 torque adapter 0.1Nm for 4 mm bits
  • 4-972 torque adapter 0.2Nm for 4 mm bits
  • 6-340-3 C4 Bit set 42 pcs, consists of:
  • Slot 1.0-1.5-2.0-2.5-3.0
  • Cross-recess PH000-PH00-PH0-PH1
  • Torx T3-T4-T5-T6-T7-T8-T9-T10-T15
  • Hex 0.9-1.3-1.5-2.0-2.5-3.0
  • Wrench 2.5-3.0-3.5-4.0-4.5-5.0
  • Triangle 1.6-2.0-2.2-2.3, Square S0-S1
  • Pentalobe P2-P5-P6, SIM-Eject, Tri-Point 0-1
  • 6-340-2 bit extension for 4 mm (5/32 inch) hex bits
  • 6-340-1 ESD bit holder dissipative for 4 mm (5/32 inch) hex bits
  • 4-564 bit Adapter 1/4 to 4 mm bits, length 42.5 mm
• 
  
•