- 泽任订制
- FST动物实验器械
- 瑞士ideal-tek镊子
- 瑞士Dumont镊子
- Weller
- Techni-Tool
- 瑞士Rubis镊子
- arosurgica
- Genesee Scientific
- Gilder Grids
-
Entegris
- WEICON
- ACCURIS
- AIMS
- RMC钻石刀
- Sipel镊子
- 德国WIHA
-
Si-Mat
- Jokari
- Circuitmedic
-
Glissando病理切片扫描仪
- KNIPEX(凯尼派克)
- Swann-morton
- Cellpoint Scientific
- Swanstrom
- All-spec
- 新华器械
- Excelta
- MENDA
- MEISEI
- Erem
- Regine
-
OPTRASCAN病理扫描仪
- Benchmark
-
IDEAL
- 大龙仪器
- 五洋医疗
- Hozan(宝山)
- 3M
- Stoelting
- Roboz
-
Diatome钻石刀
- Fine Science Tools
- PLATO
- NanoSoft
-
Avantama
-
PSI打击器及配件
- Aptum
- xuron
- SPI
-
抗原检测
- ASI Instruments
-
上海一恒
-
上海雷磁
- Quantifoil
- 上海方需
- 苏州六六
-
Hamilton
- ISMART
-
显微镜
-
Bonllmann
- AVEN
- 塔望科技
-
瑞典Haglof激光测距仪
- STILLE
-
美国安维迪
- 德国贝朗蛇牌
- Medline
-
蛋白纯化系统
-
OHAUS奥豪斯
- 康博特森
- Ossila
- 赛宁(苏州)生物
- Bernstein
- 洁盟清洗机
- Ted Pella
- DSI
- Keller
-
Smart Tweezers
- 瑞士PB
-
Microscopes Internat...
- Lattice Gear
-
凯氏定氮仪
- lindstrom
- 美国EMS
-
1-material
-
仪器
- realisticflies
- Boive
- Zivic
CAS#: | 3101-60-8, 01675-54-3, 25068-38-6 |
---|---|
Chemical Formula: | Not available |
Appearance: | Liquid |
Color: | Clear colorless to light |
Odor: | Slight |
Boiling/condensation point: | >200°C (>392°F) |
Flash point: Closed cup: | >200°C (>392°F) |
Specific Gravity (H2O = 1): | 1.16 |
Solubility in Water: | Practically insoluble |
Viscosity @ 25°C, cP: | 7500-9500 |
Package Size: | 450 mL |
Araldite 6005, sometimes also called Araldite GY 6005, is the resin of choice in a number of different microscopy-oriented embedding formulations. It is a light-colored, medium viscosity, general purpose modified bisphenol A epoxy resin. It can be cured with a wide variety of hardeners depending on the application and the desired properties.
Araldite 6005 should be stored in a dry place in the original sealed containers, at temperatures between 2°C and 40°C (36°F and 104°F). After use, tightly reseal containers. The product should not be exposed to direct sunlight. Like most liquid epoxy resins, Araldite 6005 may crystallize when stored below room temperature. Heating the crystallized resin to 60 -70°C (140 -160°F), preferably in a water bath, for several hours, may restore its original physical properties.
Diluent: Some protocols require a "thinning" of the Araldite 6005 resin and the recommended diluent, which will also act as a solvent for the resin, is propylene oxide.